tt01 rebuilt !!!

[AIR-LWR]

new alloy hex nuts , brand new spur gear (55t) new drift springs fixed front steering problem soldered motor plugs (never being soldered on lol) changed battery plug to tamiya from deans plug to suite

[AIR-LWR]

sucks now i have to get a new pinion gear & maybe replace the motor so its outta action once again P.O.S lol

[PROJECTZ3R0]

did you not get the 25 turn pinion when you did the 55 turn spur swap?
keep at it bud that's what I did and now its all sorted and running well (I had a 3 month wait just to get my transmitter going)

[aaronrandom]

i would just get 25t and 55t gearing and a metal motor mount. have you got full bearings????

[AIR-LWR]

its got a metal mount an i think a 25t pinion , @ projectz3ro narh i never did that swap in end looks like i should of now FML an no full bearings that i know of

[PROJECTZ3R0]

bearings are sweet to have, get some if you don't have any

if you already have the 25t pinion keep it with the 55t spur

you should pull it all down and clean it up and have a look at everything see what you have and what you want ect

[AIR-LWR]

bearings are sweet to have, get some if you don't have any

if you already have the 25t pinion keep it with the 55t spur

you should pull it all down and clean it up and have a look at everything see what you have and what you want ect

ah thats a good idea bro , narh i need to replace that 25t piion things poked as lol it got the point were its worn down so bad it lipped the tooths on the outter edge , ill be going down to the local model shop in the next couple a days see if theres any 55t spur gear pack and a 25t pinion....

[PROJECTZ3R0]

i got my spur gears 55t and 58t in one pack and my pinnion 25t and 24t in another pack

[AIR-LWR]

i got my spur gears 55t and 58t in one pack and my pinnion 25t and 24t in another pack

yehh sweet ive seen that spur pack at the shop just needr see if hes got the pinion pack aswell so i can buy both at the same time