Being released July 7th 2007
Strongest TA05 which concentrates the know-how of TRF:
The fact that it has become the series first chassis kit is TA05 MS. TRF415 of the pure racer and TA05 of isometric 2 belt drives it sets the motor helicopter loading site which decides the weight balance of the body, to intermediate position almost, upper 2mm, adopting the 2.5mm thick carbon double deck. Looking back characteristic and the good quality of the throttle response of TRF415 where TA05 is superior it was compatible at high dimension. Furthermore, the front and back wide pitch pulley, equipping front one way and the aluminum motor mount etc. of cantilever center shaft specification. In addition, as for center pulley as for direct type and damper stay also front and back 3mm thick carbon make, front and back common high accuracy aluminum make bulkhead, aluminum make steering wheel arm standard equipment. It finished in the series strongest machine which concentrates the know-how of TRF.
The aluminum steering wheel wiper which optimizes Ackermann. As for pulley also front and back wide pitch type.
As for direct center pulley in shaft cantilever type being slim motor mount. The belt the rear is short a little setting.
Approximately adopting the common aluminum make bulkhead. Rear aluminum diff. joint standard equipment.
- 2.5mm carbon fibre chassis
- 2.0mm carbon fibre upper deck
- 3.0mm carbon fibre damper stays
- cantilever centre shaft
- precision blue anodized aluminium bulkheads and motor mount
- precision aluminium steering (same as TRF415MSXX & MRE)
- wide pitch diff pulleys front & rear
- front one-way
- direct centre pulley